|
Re: Flat top pistons for a15 | Subject: Re: Flat top pistons for a15 by 72datto on 2017/6/7 10:59:41
Cheers for that Tom, I was hoping someone had another way by now that didn't need as much machining work done as to save the back pocket a tad. Will have a ponder on what direction I'll head with the piston as to take into account diameterand not taking too much off the block So I can end up with a NA set up and have a spare cam and pistons on rods to change to forced induction later and I also have a spare sump with the oil return line in it already as well...
|
|