|
Re: Wear Rocker arm | Subject: Re: Wear Rocker arm by ang94541 on 2017/9/13 5:56:08
Regarding the rocker tip damage, I had this happen to me and was told it was due to valve float. What do the valve stem tips look like? Are they damaged also? Have you confirmed the valve springs are not stacking solid at full lift?
Regarding the scoring on the ID of the rocker arm, The last time I assembled my cylinder head rocker arm assembly, I noticed that I torqued the rocker tower bolt too tight and the rocker became too difficult to move by hand. Basically, I was crushing the rocker shaft and it was not round. Luckily, I loosened the bolt and retorqued and all was well again.
|
|