|
|
| Car Stalls I am going crazy now !!! |
Subject: Car Stalls I am going crazy now !!!
by Sumith on 2017/9/11 5:13:18
Hi Guys
My b210 runs rough and higher idle it does not idle smoothly.i have checked almost everything but no good at all
I am running Toyota ke30 Asian carburetor on it
Plugged closed all the vacuum hoses individually and all at once to see whether there is any vacuum leak yet no good.
Checked the ignition contact point plugs looks great (got up at midnight and checked the spark) perfect bluish spark for all 4 cylinders.
Checked the carburetor float almost halfway looks good.
All the packing to the carburetor are new and replaced recently with good ones.
No miss, no backfire, no misfires , good response, on cruising can reach to 70-90KMPH with no hesitation
But Noticed these kind of abnormal behaviors.
1.When Engine is hot it runs very high idle, can not take it down
2. Air fuel mixture screw does not respond at all.
3.Closed air fuel mixture screw to the bottom seat and started it yet it starts and accelerate normal.
4.when idle, if I pull the throttle upwards it accelerate normal, but when idles if I pull the throttle backwards from idle position, it reduce the engine rpm and stalls at once, just gave a clue whether my carburetor door or throttle shaft defective ?
The only thing I have to do in this carburetor is throttle shaft and door, before I go and go it want to get your guys ideas suggestions feedback
Because thinking the same thing I repaired my Hitachi carburetor door and shaft but it did not sort out the issue
After that thinking there is something series with my Hitachi I replaced it with Asian carburetor that I got free from my friend.
Pulled a spark plug out , see the image here with
thanks
regards
sumith
|
|
