|
Re: Overheating troubles | Subject: Re: Overheating troubles by ddgonzal on 2018/3/14 9:15:11
Good pics. With 20 ohm it's supposed to read 1/2 way. With 100 ohms, I believe it should be on the first line, so that looks good
It seems to me it's a gauge problem. Yes, the gauge can be calibrated by adjusting the regulator. This will also affect the fuel gauge. There is a screw on the regulator, not sure how to adjust it. The voltage swings back and forth, maybe adjust the voltage a little bit one way or another, or maybe increase/decrease the points gap a bit
Or maybe just file the points a bit. Might be a tiny bit corroded
|
|