|
|
| Re: A15 Compression calculation with GX head |
Subject: Re: A15 Compression calculation with GX head
by ddgonzal on 2018/4/13 22:26:04
So it's not exactly at the bottom of the cylinder, it is at the bottom of the traveled portion which for A15 is 82mm down from the initial ring position. When you put the ring in the bore, turn a piston upside down and push the ring down with the piston -- this will "square" the ring in the bore. Do this with lightly oiled cylinder so that the ring & piston can slide
|
|
