|
Re: Sticking Throttle | Subject: Re: Sticking Throttle by SunnyDaze on 2018/10/19 4:09:46
Forgot to update this one:
The nut seemed to be adjusted correctly - finger tight plus 1/6 turn. I removed the nut and carefully reinstalled it to just finger tight. The throttle still sticks unfortunately. In fact the nut might even be a bit loose - I can move it a bit with my fingers, but it's locked down with the tab so hopefully it stays put.
I ended up fitting a second spring and it's ok now, but didn't really find the cause.
|
|