|
|
| Re: 75-77 mm Flat Top Pistons for A12A ? |
Subject: Re: 75-77 mm Flat Top Pistons for A12A ?
by D on 2019/3/11 4:12:34
the Isuzu ones are 28.5mm thats 4-5mm less than the discussed items
they handle boost well, are lighter and shaving block 4-5mm should
prob? not be an issue as A12 engines are thickly casted units.
Id check if PJZ has longer rods available as I recall he had some
126mm rods available at one stage which could be fiat units.
They would allow the A12 with A13 capacity to raise the redline
Fiat 500 126mm rods x 2 sets are cheap from alibaba or aliexpress
https://www.aliexpress.com/item/connec ... E&ws_ab_test=searchweb0_0,searchweb201602_2_10065_10068_319_10059_10884_317_10887_10696_321_322_10084_453_10083_454_10103_10618_10307_537_536_10902,searchweb201603_6,ppcSwitch_0&algo_expid=ebf4f576-c333-4ba2-bc44-b1207b3158ca-1&algo_pvid=ebf4f576-c333-4ba2-bc44-b1207b3158ca
same but doubled in price
https://www.maxpeedingrods.co.uk/high- ... necting-rods-conrods.html
specs are almost spot on to A12 rods
https://www.hurricanerods.com/products ... steel-connecting-rod.html
Engine: Fiat 500 Abarth Punto 1.4L T-Jet
Part Type: Connecting Rods
Center to Center Length: 129mm/5.079"
Big End Bore Diameter: 45.13mm/1.777"
Big End Width: 21.7mm/0.854"
Small End Bore Diameter: 18mm /0.709"
Small End Width: 21.7mm/0.854"
Beam Style: H-beam
Connecting Rod Bolt Diameter:5/16"
Approximate Connecting Rod Weight: 415g/piece
Advertised Horsepower Rating: 550hp
Quantity: Sold as 4 pieces /set
Material: Forged 4340 steel
Connecting Rod Finish: Shot-peened, Polished
Pin: Bronze wrist pin bushings
Wrist Pin Style: Floating
Cap Retention Style: Cap screw
Weight Matched Set: Yes ,Balanced +/- 1g
Magnafluxed: Yes
Private Label: Yes ,available
Custom design: Yes, accept
Rod Wrist Pin Style: Floating
Small end diameter:: 20.005mm
warranty: limited lifetime warranty
|
|
