|
Re: what type/brand of Ignition is this? | Subject: Re: what type/brand of Ignition is this? by ddgonzal on 2019/10/7 10:17:18
Yeah I can see it now. Looks like Lumenition conversion. Needs an external box
The bigger problem is the vacuum advance is not connected, so the timing will randomly vary by 50 degrees while running
A late-model distributor fits -- just modify the hold-down plate to cut out a bit of the slot
The yellow marks show where you should cut (or you can cut it twice, like I did ). This lets the 5-degree timing line up in the middle of the adjustment range, with the new distributor pointing the same direction as the original distributor
for the 210 distributor * Head of T: "C" connector goes to coil negative * Stem of T: "B" connector goes to coil positive
|
|