|
|
| It's official I'm an oblivious amatuer racer car driver |
Subject: It's official I'm an oblivious amatuer racer car driver
by Rallytwit on 2019/10/28 20:35:51
So I was in the process of taking apart the struts to install Koni race inserts and upon remove the left front wheel, I saw that the bolt holding the rod end to the sway bar was gone and the link was lying on the control arm. It's a bit of a mystery as I use nylock nuts on the link.
In my most recent race, around lap three the car development turn-in oversteer in higher speed corners (85-90mph)and in a particular right left right the front end felt like it was tripping over itself. I'd written this off to the tires being a year old, the KYB insert being cheap and 4-5 years old and my possibly overdriving the car.
My ignoring the oversteer is understandable given I'm stupid comfortable with oversteer but the front end should have been a red flag. Naturally I'll blame Stan because I was chasing him, it couldn't possibly be my questionable mechanical ability.
It also explains why I was so far of the lap times I thought I should be turning.
Of course if there was a disconnected sway bar alert in the car I still would have spent the next 6 laps trying to pass as many cars as possible...………..cuz I'm oblivious.
|
|
