|
|
| Re: HELP- A15 with original injection inlet manifold need help setting up |
Subject: Re: HELP- A15 with original injection inlet manifold need help setting up
by ddgonzal on 2019/12/4 9:10:52
chris produced turbo manifolds, but no longer
About the gasket, Datsun made seven different A14 oval port gaskets all shaped a little different
Use the H89 one although there isn't much material at the top so be careful how you notch it. I'd bolt it first to the manifold and mark it so you can remove just the minimum material for the notch. Using a thin but sharp chisel you can easily cut a rounded notch. Supplement it with a thick little bit of RTV above the notch (let it tack up before bolting together -- as per the directions on the RTV package)
14035-05H01 has superceded the H89 gasket and appears to have bit more room above the ports
Or you could use the GX gasket 14035-H2300, looks like no notching is needed
The original EGI gasket looks like this
14035-H9201
14035-H9202
|
|
![Open in new window](javascript:CaricaFoto("http://datsun1200.com/uploads/photos/23938.jpg");)
![Open in new window](javascript:CaricaFoto("http://datsun1200.com/uploads/photos/22047.jpg");)
![Open in new window](javascript:CaricaFoto("http://datsun1200.com/uploads/photos/22088.jpg");)
![Open in new window](javascript:CaricaFoto("http://datsun1200.com/uploads/photos/24925.jpg");)