|
|
| Re: Early A12 fit into later A12 crossmember |
Subject: Re: Early A12 fit into later A12 crossmember
by edp on 2020/1/24 0:51:05
thanks for fixing the pic's dave, my measurements indicate otherwise as to fit on the right side mount & cross member standoff.
I think the A15 from the back of block to mount is about 8", with the A12 the distance is more like 9.5" - meaning center of mount hole to back edge of block and sandwich plate between engine & trans.
that pushes the mount farther towards the core support by about 1.5", only thing I can think of is making the adapter plate longer that the A15 is using. That s why I was asking about cross members, I always thought it was a stock 73 cross member...
|
|
