|
|
| Re: Shortening h145 |
Subject: Re: Shortening h145
by a12dato120y on 2021/1/19 0:44:23
Hi guys i was able to shorten my h145 by 20mm overall (10mm either side)
Axles hit the spider gear cross shaft so i had to cut the end a few mm. Its roughly 4mm less spline engagement on the diff but with an a12 i think it should be ok
If i ever find a spare h145 diff i plan to cut the spline section on the side gears and weld it onto my diff side gears just to increase its length and give it more engagement.
And yes the one issue is the brake lines and nipples arr quite close to the spring plate but it seems fine.
Handbrake cable had enough adjustment in it to take the difference luckily.
|
|
