User Login    
 + Register
  • Main navigation
Login
Username:

Password:


Lost Password?

Register now!
Fast Search
Slow Search
Google Ad


Report message:*
 

Re: Shortening h145

Subject: Re: Shortening h145
by dattoboy_nz on 2021/1/13 18:17:13

I'm running a h165 from a 411 bluebird with an alloy head. It's 25mm narrower over all - 12.5mm per side and allowed me to run a 8j wheel on a coupe. They run the same spline as the later ute h165B but the axle tubes and axle diameter is the same as h145 (tiney). I mix matched some bearings, so I could run larger ute axles and turned 6 or 8mm off the end of the axle (because its to long in the housing) and releaved the end of the spline so it could slip in a smidge further to all work. Got pics if anyone is interested