|
Re: Sedan Rear Shocks | Subject: Re: Sedan Rear Shocks by ddgonzal on 2021/10/21 23:17:05
Post: Koni 80-1551 Suit Coupe Koni 80 1551 (26-2012) Rebound Adjustable off vehicle extended: 415 mm (25 mm less than stock) compressed 270 mm (10 mm less than stock)
In general, lowering the Coupe does not require a shorter shock than the stocker. The bump stops prevents the shock from bottoming out.
However, with a longer shock at maximum bump, the shock will run completely out of travel before the axle does. The Koni 80-1551 minimum length is reportedly 10mm longer than the stocker. Which still might be OK but if you trim the bump stop to get even more travel then the Koni is too long
modified lower shock mount
|
|