|
|
| Re: Flywheels & clutch functionality |
Subject: Re: Flywheels & clutch functionality
by edp on 2021/11/11 6:40:18
H-11 FE is the 28mm A12, K24C is 35mm off the A15. Doug in Portland confirmed 35mm of an A14/15 FW & a 28mm off an A12, he measured both so it looks like stock for A14/15 should be 35mm thick.
Both are stock FW’s , perhaps the step was milled into it by machine shop or by whoever modified the pilot bearing hole before me. I had the machine shop turn down the bushing so it’ll fit.
No Toyota FW, both Datsun.
Thanks for putting up the pics Dave , maybe I’ll figure out how to load them
|
|
