User Login    
 + Register
  • Main navigation
Login
Username:

Password:


Lost Password?

Register now!
Fast Search
Slow Search
Google Ad


Report message:*
 

Re: Flywheels & clutch functionality

Subject: Re: Flywheels & clutch functionality
by edp on 2021/11/11 6:40:18

H-11 FE is the 28mm A12, K24C is 35mm off the A15. Doug in Portland confirmed 35mm of an A14/15 FW & a 28mm off an A12, he measured both so it looks like stock for A14/15 should be 35mm thick.

Both are stock FWís , perhaps the step was milled into it by machine shop or by whoever modified the pilot bearing hole before me. I had the machine shop turn down the bushing so itíll fit.

No Toyota FW, both Datsun.

Thanks for putting up the pics Dave , maybe Iíll figure out how to load them