|
|
| Re: Lowering Of Engine |
Subject: Re: Lowering Of Engine
by ddgonzal on 2023/1/16 23:22:13
what some have done:
1. Notch the engine crossmember, so that the unmodified oil pan will clear lowering
2. Fit shorter engine mount insulators (or eliminate them, "hard mounting" the engine, as some race cars do)
3. Use longer bolts and spacers for the transmission crossmember to lower it
#3 is optional, you don't have to do it, but at high rpms a little vibration may be introduced via the driveshaft angle. But lowering the gearbox the same amount will make it aligned correctly
|
|
