|
|
| Re: Remake of the Crosslow, pushrod a-series "AY12" 11041-M0820 head. |
Subject: Re: Remake of the Crosslow, pushrod a-series "AY12" 11041-M0820 head.
by LTR on 2007/6/4 13:19:22
I intend, as I'm sure allsmost everyone does.. To keep the price reasonable what ever it is when it comes to project something like this.
When the original head comes to me in hopefully two weeks, I'm going to get some idea for what size of this thing is after taking it to the special aluminium casting company.
The head that I found is without the pushrod mechanisms but now when I have seen it in real life the exhaust side is the same as normal head.
Not in same place sideways but one can use also originals.
The Inlet side needs to be remade because there is not a model. But my friend who works in a universitys machinery has built nearly anything that comes in to mind and he has promised to solve this. From a Toyota 2t or mitsubishi one can take some idea what needs to be done.
And from the original head you can see the places where everything has been attached to.
That helps alot.
Sending by post is no problem.
I just wanted to ask if there is interest and from the sound of your post I can think that there is.
I'll inform the pricing in the future but firstly I need to know all what is needed that there doesn't come suprises on the way.
There is allso the possibility to make the head without valves etc. to make it cheaper "blank" could be the correct name for that.
But everyone need at least the head and the valvecover.
In the FIA homologation of PE10/ A12GX E10 is some pictures also. Have you seen these?
One picture is from the hemi chamber and other from the exhaustside viewing the places for sparkplugs etc.
I dont have web space to load them to but the .TIF file(the homolocation) I can send for those who are in intrest.
|
|
