|
|
| 1200 sedan project.. :( |
Subject: 1200 sedan project.. :(
by iDatto on 2012/4/25 13:13:39
hey guys, the time has come that ive been dreading for months.. im going to have to put my sedan project up for sale :(.
im guessing nobody will be interested in buying the complete project so im parting it out.
i have a mint shell, has some pannel damage but mint condition with just a few minor pieces of rust in the left sil, the shell has been sand blasted and undercoated with some pannel beating done. i have the two front quater gaurds but no bonnet. all the glass is there but the front and rear have seen better days. also the four doors have been pannel beated also.
i have an r31 diff thats been shortened down to stock datsun width with a shimmed borgy diff. all new calipers, rotors and brake pads for the rear.
i recently had the 60 series 5 speed gear box rebuilt with new bearings and synchroes put in. the gears are in mint condtion so they where put back in.
for the front i have 120y struts with 6kg springs and coilover selves welded on with s13 vented disc's and calipers that where just fitted with new pistons and seals with a fresh coat of paint put over them.
also i have an a15 that was in rob souters 1200 race coupe, ive been told it made good power and ran perfect, i has a large cam but not overly aggressive so it makes for a great street tune engine. its been ported to suit the delorto's that are fitted with a redline manifold with slightly larger valves and higher compression.
i have a maddat rebuilt front end kit with all the bushes to suit the front of a 1200 with ball joints castor arms lower control arms tie rods pit man idler steering box and column.
ill post up some pics tomorrow but for now here is some of my stuff.. dont be afraid to ask if i have something, because i probably will have it!!!
im located on the gold coast, pm me on here or send me a text or call me on 0449 139 119
|
|
