|
|
| Carillo rods, Arias Pistons and Alloy pushrods |
Subject: Carillo rods, Arias Pistons and Alloy pushrods
by pjz on 2015/1/28 20:25:57
Hello,
I have a set of (4) matched 121.5mm Carillo con rods, with (4) Arias 74mm race pistons. Early A12 +1mm overbore and the rod length of the early A12 engines. The pistons are wedge dome but do NOT have the underside of the dome machined. So, THEY CAN BE MADE INTO FLAT TOP PISTONS. EASILY.
$500 USD plus shipping. These came out of a running engine and are complete as removed.
Set #1: (8) aluminum pushrods out of a competitors engine. 150mm overall length (including the pushrod cup), with an effective length of 147mm. Slightly shorter than stock A12 pushrods. $50/set of (8) plus shipping.
Set #2: (10) chrome moly 3-piece pushrods. [They are made to order by our pushrod manufacturer.] 146mm overall with effective length of 142.5mm. $50/set of (10) plus shipping.
Set #3: (7) chrome moly 3-piece pushrods plus an extra long pushrod. [They are made to order by our pushrod manufacturer.] 148mm overall with effective length of 144.5mm. I WILL INCLUDE ONE (1) MORE LONGER PUSHROD FROM THE SAME MANUFACTURER THAT CAN BE SHORTENED TO MATCH. Very easy to shorten. $50/set of (8) plus shipping.
Email is the easiest for me to work with.
Peter
PeterZekert at JUN0 D0T C0M
|
|
