|
Re: Swap: A15 for A14 crankshaft | Subject: Re: Swap: A15 for A14 crankshaft by Rallytwit on 2019/9/4 2:10:14
David the plan would be to use the A14 crank in conjunction with the Honda pistons as a 30mm pin height is what's needed for the 77mm stroke. I've yet to try an A15 crank in an A12 block, there is a Honda piston with a 27mm pin height which would be .4 proud of the deck, not an issue one could in theory mill the piston top.
|
|