User Login    
 + Register
  • Main navigation
Login
Username:

Password:


Lost Password?

Register now!
Fast Search
Slow Search
Google Ad


Report message:*
 

Re: Wtb crankcase breather pipe

Subject: Re: Wtb crankcase breather pipe
by ddgonzal on 2021/6/23 6:51:15

How I connected mine to catch can was to REMOVE the pipe, and I used copper plumbing fittings with exhaust system sealer for set it in place. If needed later, it can be knocked out again, but will semi-permanently stay there
Open in new window

Benny tapped the hole with a M22 tap and used a screw in fitting


So the stock Datsun 1200 breather pipe is straight
Open in new window

This can be cut shorter and a rubber hose connected to a fitting. Can use the stock breather hose cut short and an AN fitting with adapter down to smaller size

many B210 & B310s have right-angle Breather Tubes
Open in new window