|
|
| Re: billet head --not 1200 |
Subject: Re: billet head --not 1200
by D on 2017/5/20 12:39:58
Fiat 128 engines are legendary rev machines 80mm bores and 55.5mm stroke!
The 1581cc version uses 86mm bores like and SR20 but still 55.5mm stroke!!!!
All versions have fully counterweighed 5 bearing cranks
They dont get enough limelight considering its basically the engine that
Made FIAT what it is and able to buy many Italian makes inc. Ferrari.
Nismo1 can you get the bore spacings of any of the UNO engines?
The Uno engine can be bored to 89mm and the 1900cc uno engines in
race trim supposedly make 230hp and the head is super lightweight
direct actuating cam on bucket weighing around 14kg or 12kg lighter
than an SR20DE head. Alot of the water and oil drain looks similar
and would make alot of people scratch their heads!
Non crossflow all alloy slant 4 Nissan frankenstein
https://www.youtube.com/watch?v=WU4wbshM3lw
|
|
![Open in new window](javascript:CaricaFoto("http://www.carangoweb.com.br/wp-content/gallery/fiat-uno-rebaixado-sevel-preparado/fiat-uno-aspirado.jpg");)