|
|
| Re: 2L 1200 Ute |
Subject: Re: 2L 1200 Ute
by blue_devil on 2016/3/26 9:40:41
The next issue was the front guards. As you can see the Eye Brow height ( centre of the wheel to the Bottom of the Flare ) was way off. Mine needs to be 290mm to match my engineers report. So i had to cut and re-glass the flares to make them 290mm from the centre of my wheel, matching the rears.
Once all the fibreglass and bog work was done they were flow coated and rubbed back, Primed, guid coat and rubbed back again.
|
|
