|
|
| Re: LAGWAGON II the 1000 version... with no lag |
Subject: Re: LAGWAGON II the 1000 version... with no lag
by LAGWAGON on 2009/8/28 8:09:29
A lot of extractors prove hard to fit in the 1000 engine bay so i decided to make my own out of stainless steel. After so much mucking around i ended up flipping the engine mount on the passenger side upside down to allow me heaps more room for the pipes. I had to modify the crossmember to accept the much lower mount too.
the extractors are only at the primaries stage so far, and will have some nice juicy secondries to not rob me of too much down low in the rev range.
The fuel system is under way, i've decided to not run a surge tank as the shape of the wagon's tank is tall and narrow so hopefully i won't have an issue. The feed is taken from the tank drain plug and runs 1/2 inch to the pump with the original feed now being the return.
|
|
![Open in new window](javascript:CaricaFoto("http://i198.photobucket.com/albums/aa124/LAG510/moddedmount.jpg");)
![Open in new window](javascript:CaricaFoto("http://i198.photobucket.com/albums/aa124/LAG510/moddedmount2.jpg");)
![Open in new window](javascript:CaricaFoto("http://datsun1200.com/uploads/photos/19911.jpg");)
![Open in new window](javascript:CaricaFoto("http://i198.photobucket.com/albums/aa124/LAG510/DSCN0512.jpg");)
![Open in new window](javascript:CaricaFoto("http://i198.photobucket.com/albums/aa124/LAG510/DSCN0516.jpg");)