|
|
| Re: Estyres 1200 ute build thread V1.0 |
Subject: Re: Estyres 1200 ute build thread V1.0
by estyre on 2011/8/14 16:12:07
ok so i have to thank ernie for all his help through out this build ,we have spend a few hours on the phone and he has beeen a huge help with this motor
anyone that can instruct me on how to dial a cam in ,over the phone is a legend !
now ,ive had 3 goes at trying to upload a huge spool on what i did ,and all the pics
i picked the motor up ,brought it home ,cleaned it up and got ready to paint it ,after i had done my piston to deck hieghts
next i painted the block and put all the bearing crank and pistons with rings in the block ,check the bearing clearances with plastigauge and then lubed up the journals and torqued it all down
next i dialed the cam in and did my piston to valve clearances again ,it all checked out so i then moved on to putting the head gasket and head on with the pushrods
next i painted up my rocker cover ,polished my timing cover ,and painted most the other bolt on bits
ok so the pics
|
|
