|
Re: DEMAC's 1200 UTE | Subject: Re: DEMAC's 1200 UTE by demacoz on 2011/4/17 5:48:49
Bit of an update ...
Cleaned up a bit in the engine bay, bent back the leftovers of the radiator support. started to repaint the tops of the strut towers (the paint was chalky so went back to bare metal) Removed the fuel tank , need to think about an R31 tank and fuel pump/sensor. Bought a cluster for an auto 180sx (s13) bought a litre of 'seam sealer' and sealed up most of the seams under the car Bought a few cans or 'Auto Flex' underbody spray and Sprayed underneath Borrowed a madddat crossmember off tommo and did another mock up
the auto does not seem to line up very well in the back of the tunnel (that may need some re 'shape-ing') but sits just under the side rails - it should be ok
I don't know why I cant imbed the photos from photo bucket so here are pics (I hate computers sometimes)
|
|