|
|
| Re: Datsunbeginner becomes an expert - Vanilla Ice ute build USA |
Subject: Re: Datsunbeginner becomes an expert - Vanilla Ice ute build USA
by ddgonzal on 2018/7/29 19:13:17
That's right, there are several different bearings. Early 1200 sedan/coupe vs all other 1200 and perhaps Japan-assembled vs local-assembled (Borg-Warner diffs, at least 3 different ones). And in the last 45+ years someone might have swapped parts so it is necessary to measure what you are trying to replace
For coupes originally sold in USA like Jeff's coupe here (all Japan-assembled) there is the 1971-early 1973 bearing 62x32x16 mm and the late 1973 72x32x19 mm
But these are bearings and even with the same part number there are different ones. For example type 6206 bearing has a bore size of 30mm. The 6206 bearing with a 32mm bore (for 1200 sedan/coupe)is called a "special bore size" bearing. And like the photo above, two boxes with identical part number had two slightly different bearings (!)
|
|
