|
Re: States 1200 Coupe. (Oregon, US) | Subject: Re: States 1200 Coupe. (Oregon, US) by Mattndew76 on 2016/8/26 21:14:22
I started working on my Intake for the car this week. I made the intake parts as bolt together items since I didn't have the capability to machine runners like this from a solid block. the mating surfaces have a .254mm groove on the face to hold small beads of RTV. Smother the surface with RTV and clamp with the bolts.
Today I pressure tested the results in the water tank. I tested up to 30psi seeing I wouldnt be running over 15psi from the super charger. No leaks from the seam.
|
|