|
|
| Re: DEMAC's 1200 Sedan |
Subject: Re: DEMAC's 1200 Sedan
by demacoz on 2022/12/10 21:15:49
I didn't like the angle that the gearbox and motor were on and the fact that the dump pipe was fouling so - out with the angle grinder and the welder
Forgive my bird poo welds .... they will get a clean up later. The positioning on the engine cross member hasn't changed but the angles have.
Also test fitted the shortened Diff that I got back on Thursday. 
the last photo is the distance between the diff (where I have it at the moment) and the back of the standard 180SX S13 g'box ...the shifter comes out directly between the (driver/passenger) front seat mounts
|
|
