|
|
| Re: Swiss Cheese '71 B110 (reclaiming my youth) |
Subject: Re: Swiss Cheese '71 B110 (reclaiming my youth)
by torino120 on 2025/4/26 11:43:28
Quote:
ddgonzal wrote:
can you tell us more about this push-to-start setup?
Ahh yes, my jerryrigged ignition barrel setup
White (batt 12v) to 30 on the relay, pin 1 on the toggle switch and pin 1 on the press switch
Black/Yellow (starter wire) to 87 on the relay
Black/White (ignition/accessory wire) to pin 2 on the press switch
Pin 2 on toggle switch to 85 on the relay and 86 on relay/press switch ground to chassis ground
Press switch in (supplies ignition/accessory to vehicle), flick toggle switch (fires starter) and vehicle runs
To ‘turn vehicle off’, press the switch again to cut ignition/accessory power to vehicle
|
|
