Has any one else read that Nissan is relaunching Datsun . It will be in a few select countries as an economy Nissan but I think it will be great to see what they do. I'll attach a link for those yet to see it.
http://www.forbes.com/sites/micheline ... un-is-set-for-a-comeback/

i dont have my own place i would be taking it to a shop i used to work in I PREFER TO WORK ON MY OWN BUT YOU CAN WATCH

Seriously buy the paint put the car on a trailer and drive it to me I'll strip mask paint it I'll charge you the cost of the oven and 500 labour i know I'm in Melbourne but it will still be cheaper

hi there you should be able to get 2 litres of any solid clolour plus hardener and thinners enough to paint a whole ute inside and out for under 200 protec in thornbury melbourne supplied mine for 176 any one with reasonable psices would onlyt charge 200 to 300 for oven hire and maybe 300 to 400 to rub and prep and paint if there is no repairs to be done and it is already stripped that being said i did mine myself and only paid oven hire 200 and paint 176 hope you have luck finding the right price

i have the car running now i got a new starter the old one was the original from 1972 s...h...i...t..... now im going to need to fix the altinator there is no power running to it for some reason thanks for looking /helping / and suggestions

Hi I'm having problems with the starter motor now I've rerun all my power and earth leads I got the car started by jumping it I ran jumper leads to start it but now I can't get it started both batteries are fine and I've got power what other cars can I use a starter motor from in my 1200 ute

I have power at tv back of the ignition until I turn it I think a wire or mechanism is earthing the car out........ I also added the fusesble link started once then blew the fuse so I'm trouble shooting with my wires does amy one has a spare wire loom

i definateley dont have this wire mine is hard wired with an amp line

Attach file:

---

  16498.jpg (46.08 KB)

there is a couple but they were like that at the start i have made new wires for a coupl of places but i have tested them and they are clean connections

bad news no fuseable wire i do have to wires coming out of the positive terminal one main and another that links to a red and white wire in the loom