Thanks guys for the help. I put a new condensor on and then went to put new points on and the termial just fell off. I put a new terminal on and it fired straight up like all good Datsun do. It's always the little things that get us.

Car won't start today checked the coil lead and had no spark out put grabed a new coil in and still nothing. Anyone have an idea for me what to do from here

Guys I'm in Brisbane looking for speedo cable maybe 120y will fit. it's for a 4 speed

Hi it's Greg here I will pick up today ring me to arrange a time on 0416258136

I'm leaving north brisbane 5.30am so I might see you on the road. Has any one got any feedback from today's events

I have a 1400gx set up etc just rebuilt motor with cam regind approx 30/70. all going well I set dizzy @ 7degrees. problems: still pings and SU's are flooding/rich and idle is a bit up and down. I drove120 ks today to run in. I will now run hi octane fuel see if it make a diffrence if any one has got ideas and does anyone have a dyno/tuner that works on these carbs etc in Brisbane.

My mate went and got the whole motor from them for his Sunny coupe

Any one in the club racing ??? here is a link http://www.timeattack.com.au/forum/index.php

thank for the info

Time to re-ring my A14gx 2 questions
1)are all the bolt tightening spec etc the same as 1200 motor as I have manual for this.
2) Can I put a A15 crank in my block and use my A14 conrods, bearings etc without grinding and swaping bits and pieces to give it some more cc