But would it give greater performance than the standard carby?

If so, Im aware that the gain in performance is very small but Im just curious!

Read in the tech section that the A12 carby has bigger jets than A14-15 carbies, thus it is beneficial to use an A12 carby on A14 or A15?

Wanting to access people opinion and experiences with this (if any)?

If I was located near you, Id snap that up right away!

Called a wreckers today and they suggested that the 1200 sump does fit without any problems! Has anyone done the same conversion and used the vanette sump?

Its quite difficult to ontain a sump from a 1400 or 1500 sunny, this is the reason why Im asking this question!

Thanks for the info ddgonzal. I have already read through the tech section but most applies to datsun 1200 models whilst I own a sunny. Therefore shifting engine mounts to fit the a15 isnt necessary and the remaining information Im familiar with!

Ocphangaz, your right dont know much about a series motors and still learning! Swapping the engines over is easy, its just the little detials that I am unsure about e.g. sumps, a12 extractors fitting on an a15 head! These are issues that cannot be found in manuals easily and therefore I thought that many people on this site could give me some advice before I commence!

Thanks to the remaining who have been very helpful. I will post pictures up as soon as the conversion is complete!

What about exhaust ports between the a12 and a15? Are they the same size and shaPE?

I will be putting the a12 flywheel and clutch onto the a15! Can anyne suggest or know the torque settings for the flywheel and clutch??

Also, why do many people mention a sesries motors as having oval port heads? Do all a series have oval port heads? Just curious!

Hopefully the extractors on my a12 will clear the a15 inlet manifold?????

Warped?????? Must be the photo! Ran out side and checked and its perferctly normal!

This is my datto and everyday car! Needs a power increase! Currently running an a12, extractors, exhaust, chrome air filter, rebuilt carby with larger jets! Will be selling the motor soon!

Cool, so the a12 flywheel can be used on the a15!

Will the vanette sump fit into the sunny?

Im not sure what type of sunny it is! Its a sedan and thats all I know! Il post up some pictures shortly!