Hi.

I have redone my wiring but i took it apart about a year and a half ago and i cant remember which colour wires connect to the flasher relay. My hazard lights work but the indicators dont.

??? Tah, Jared.

i was thinking about doing the same thing but with a 12 inch sub. The problem i found is the "ripple" in the back wall will not seal easily and make for a reduced quality in sound.

I was thinking of building a sealed box in the back and then porting it through to the cabin.

I was going to weld a brace in the back aswell just to make sure i dont loose any structural rigidity.

Furthermore you could always use an Alpine Bass engine if you only want the vibration the subs make. will fit nicely under the seats.

Hey people, Im stumped when it comes to my brakes. Story so far is I am rebuilding my 1200 ute decided it needed to stop better so i chucked in a 180B Girlock dual cylinder brake booster. A few things needed modification - new brake lines for the front brakes, shortening of the shaft that attaches to the brake pedal and really that was about all. Problem 1- The front brakes werent getting brake fluid so i took apart the master cylinder and unblocked it. fixed. Problem 2- One of my junctions was leaking. fixed. I've bled the brake three times but im not getting any pedal. Are there any adjustments i could make to get it working? how do i tell if the whole thing is stuffed?. Ive checked for leaks at all junctions, blocked the brake lines at the master cylinder at got pressure on the pedal. There are no kinks in the lines. Its got me stumped Any help much appreciated.

i dunno, im hoping that somewhere is OZ an engineer has given one the ok.

YAY!!! The mrs has finally come around to letting me have an sr20 turbs 1200 ute. Now all i need is the car. Im looking for a... 1200 ute, sr20 turbo, engineered, driveable and thats about all i request. I will travel interstate to get it.

Cheers lads.

does space invader foam dry hard like the crash pad does it? could i carve it afterwards?

Hello all, does anybody know of/if anyone sells the foam part of the dash new? i tried Nissan but they said no. I would rather get a new one than recon the one i have. any advice much appreciated.

Jared

i got one if youre in perth, not new but in good condition

well actually now that ive thought about it a bit more that really sounds just long enough. reckon we could get it up and running by late november? that should be enough time to make a flyer, muster up some 1200 utes and fix up all the mechanical problems we have.

sound good?

hillaries to freo, gotta have longer to show off the utes than that!