drill a holes in bungs. screw then slide hammer out. clean block properly.
get new bungs from nissan(they only sell them in lots of 5). hammer in new bungs.
have a beer. look at how mighty the a series motor is. have another beer.

its a proper laser cut merge collector will take a photo down the outlet tomorrow.
the inlet manifold isn't finished yet(still waiting on parts)
-using a cylon(chris)oval port(can use round haven't stated yet) flange.
32mm id alloy tube(still trying to get bends)that goes over the rocker cover to the other side into a oem plenumn using a GM throttlebody (50mm?)(can't remember).
the idea was to keep runners skinny(not to skinny), IC pipe to match throttle opening, have the only step in pipe ID from turbo outlet, to minimise lag(for want of a better term (pressure drop?))
anyway EX manifold is fully TIG welded, all arms were welded off the manifold too minimise stress on joints, all tacked up,then welded onto merge collector, then removed from head flange, arms made even(flat)then welded(bolted tight to head)to flange. has been painted with heat paint.
the 2 bolt holes were on the T25flange, you could run a brace off it but i think i could stand on it (steam pipe is strong).

Have a new (just fabricated)high mount turbo manifold to suit Aseries.
This was made for a customerthat has changed their mind.
made with a cylon flange(chris), steam pipe bends, merge collector,T25 flange.
this is a pretty serious manifold.Designed to fit a 1200.
fits A14 A15 slight mod to suit A12(due to lower deck height on block).
open to serious offers by PM only.
will post pics tonight.(sh#t internet at work)

Attach file:

---

  DSCF8134s.JPG (197.22 KB)

nice ride. i've got an s800 convertible myself.
A series was a common swap in the honda s600/800.
i've got an A10/3speed from 600 with a very interesting cable/hydraulic clutch set up.

...back on track, awesome car engine combo, if you need to know anything(honda) give me a PM and I'll try to help.

steam!!!
steam!!!

do you want to convert to square headlights?
i can talk to the guy who has the buckets, lights and grille off my sunny truck .
180 lights are the same size as sunny truck(b122).

really cheap shaft masters
if you buy from them on your credit card make sure you tell the wife.
(it might cause issues if someone sees shaftmaasters on a credit card statement)

jeff looks like a corolla ae101/ae111 (ish) booster and master 98-01(ish).check booster book at repco/bursons/etc. i may have one under the house, i'll reply if i have one.

1st one not sure it will fit.

obx seems ok (is obx a good brand???)