you could try contacting 44lex as I know he is chasing a set up.
I know a few others that may be interested but I`m OS athe momentif it doesn`t sell send me a pm and I`ll conact you when I`m back.

Thats a factory(dealer fitted) set up from a 92(ish) sunny truck.will bolt up to all 1200`s. you will need the front pulley for this set up aswell, so I would suggest that you do an exchange for a single pulley as well. other mod needed is to do the cut out next to the radiator. Excactly same set up in my sunny truck. Your passenger will get stiff nipples!!Good Luck with the sale.

tight jeans, flano, ugg boots..... a bogan is a bogan regardless of country (one of my wifes friends).






This also had an eletric motor.




yoghurt flavoured alcohol.

`where is all the chicks?`

So many chicks. Incredibly hard to do with my wife whilst carrying my son>

Unfamilia-you should have sent me some business cards to leave around toilet blocks for you.

These places are difficult to find. Some of these pics were from a private collection (kept in 3 locations). (I was very lucky). Anyone going over shoot me a PM and I will help where I can.

Here`s a few pics from the car.

If I get time, and an internet conection I`ll try to load up some more.

Did I mention I`m in Japan atthe moment.

Walking down the street and found Sunny-Kun (Sunny-chan).




also found some other stuff>
REPLACEMENT FOR THE 1200 UTE !!





found a 170HP TS Cup car




And another one(only 150HP)




and another (these things are starting to get a bit common(LOL))




this is a RARE Datsun>




So is this

Hope your pockets are deep, GX mirrors are HARD to get (even in Japan) . I`ve got sme other fender mirrors I might sell. Send me a PM.(I won`t be able toreply for about a week)

grille will fit, but you need the head light surrounds as well(different), very rare and expensive grille. Are you going to use the update dashand taillights aswell?

(you should buy my injection setup)

There is a difference between "will it work" and "is it any good".
I can easily believe this was on a running car, I've seen worse. Something has got into the port and bounced around a lot (with some water too I think) - won't stop this from working, but will make it "un-performance"
The weld in the port, looks like it's been ported into the water gallery and then welded up(sometime this works , usually leaks) this one looks like this has worked but they were scared to re- port the weld. I am assuming guides been mowed down. the port shape looks uneven across the cyls.the marks on the port were an oval manifold has been bolted up(very missmatched). again won't stop this from working but very "un-performance"
I would also measure the thickness of the head(looks thin).

so yes i think it would work, and yes i think this is a very
"un-performance" head, (stock would be better)