|
|
|
|
Re: Datsun 1200 Sedan Build |
|
Home away from home  
Joined:
2009/10/13 21:28
From Trinidad and tobago
Group:
Registered Users
|
Pic shows a comparison of S13 Vs Stock b310 Rotor
Finally got around to put on the new S13 Setup.
New pads were also installed.Then took here for a spin.First few stops the wheels actually locked up!
Pics..
Posted on: 2017/2/16 0:42
|
|
_________________
'71 Four Door Sedan.
A15 Engine + Lighten Flywheel.
E15 Electronic Ignition 32/36 Weber EI Coil 4 into 2 into 1 Extractors 1 3/4 Exhaust Pipe Semi Flow Hotdog 60 series Gearbox H150 Diff.
Street Sleeper!
STILL LIVIN' THE 70'S LIFE !!
|
|
|
Re: Datsun 1200 Sedan Build |
|
Home away from home Joined:
2009/10/13 21:28
From Trinidad and tobago
Group:
Registered Users
|
Painted calipers, rotors, rims and struts
Posted on: 2017/2/11 18:21
|
|
_________________
'71 Four Door Sedan.
A15 Engine + Lighten Flywheel.
E15 Electronic Ignition 32/36 Weber EI Coil 4 into 2 into 1 Extractors 1 3/4 Exhaust Pipe Semi Flow Hotdog 60 series Gearbox H150 Diff.
Street Sleeper!
STILL LIVIN' THE 70'S LIFE !!
|
|
|
Re: Datsun 1200 Sedan Build |
|
Home away from home Joined:
2009/10/13 21:28
From Trinidad and tobago
Group:
Registered Users
|
Those rims are rota 13x7
Similar to the Pantasport
Posted on: 2017/2/11 16:08
|
|
_________________
'71 Four Door Sedan.
A15 Engine + Lighten Flywheel.
E15 Electronic Ignition 32/36 Weber EI Coil 4 into 2 into 1 Extractors 1 3/4 Exhaust Pipe Semi Flow Hotdog 60 series Gearbox H150 Diff.
Street Sleeper!
STILL LIVIN' THE 70'S LIFE !!
|
|
|
Re: Datsun 1200 Sedan Build |
|
Home away from home Joined:
2009/10/13 21:28
From Trinidad and tobago
Group:
Registered Users
|
Thats right DD.All carry the same caliper
mounted caliper to strut then made adapter bracket.
Clearance to wheel is good.when i paint the calipers they will come a it closer to the rim. also give my two front wheels a bit of paint as they were off.
Posted on: 2017/2/11 0:06
|
|
_________________
'71 Four Door Sedan.
A15 Engine + Lighten Flywheel.
E15 Electronic Ignition 32/36 Weber EI Coil 4 into 2 into 1 Extractors 1 3/4 Exhaust Pipe Semi Flow Hotdog 60 series Gearbox H150 Diff.
Street Sleeper!
STILL LIVIN' THE 70'S LIFE !!
|
|
|
Re: Datsun 1200 Sedan Build |
|
Home away from home Joined:
2009/10/13 21:28
From Trinidad and tobago
Group:
Registered Users
|
Removed THe front struts. compared them to the stock 120y, they are tiny.
rotor to clearance is big so the caliper will fit well. more pics to come
Posted on: 2017/2/10 3:13
|
|
_________________
'71 Four Door Sedan.
A15 Engine + Lighten Flywheel.
E15 Electronic Ignition 32/36 Weber EI Coil 4 into 2 into 1 Extractors 1 3/4 Exhaust Pipe Semi Flow Hotdog 60 series Gearbox H150 Diff.
Street Sleeper!
STILL LIVIN' THE 70'S LIFE !!
|
|
|
Re: Datsun 1200 Sedan Build |
|
Home away from home Joined:
2009/10/13 21:28
From Trinidad and tobago
Group:
Registered Users
|
Update-
Removed my old oil catch can and made a new one.The previous one the hose barbs were falling out, so i drilled the holes a little smaller and screwed them in,hold s up much better.
Got the front calipers from the Nissan Y11 series.Rotors are from the S13,Plan to use the 13'' wheels
Posted on: 2017/2/10 1:52
|
|
_________________
'71 Four Door Sedan.
A15 Engine + Lighten Flywheel.
E15 Electronic Ignition 32/36 Weber EI Coil 4 into 2 into 1 Extractors 1 3/4 Exhaust Pipe Semi Flow Hotdog 60 series Gearbox H150 Diff.
Street Sleeper!
STILL LIVIN' THE 70'S LIFE !!
|
|
|
Re: Adjustable Camber |
|
Home away from home Joined:
2009/10/13 21:28
From Trinidad and tobago
Group:
Registered Users
|
thanks for the info guys,
i have recently baught s13 coilovers and camber plates and decided to put on my 1200 sedan but i decided i will go for the smaller diameter springs and sleeve .i have removed the old shocks and got the sleeves,they are a bit dirty but i will clean them,what i really wanna ask u is where i cut my struts to put in the s13 sleeves if you'll have any measurements.i have seen work an will like to do it to my 1200,thanks much!!
Posted on: 2017/1/26 2:35
|
|
_________________
'71 Four Door Sedan.
A15 Engine + Lighten Flywheel.
E15 Electronic Ignition 32/36 Weber EI Coil 4 into 2 into 1 Extractors 1 3/4 Exhaust Pipe Semi Flow Hotdog 60 series Gearbox H150 Diff.
Street Sleeper!
STILL LIVIN' THE 70'S LIFE !!
|
|
|
Re: Datsun 1200 Sedan Build |
|
Home away from home Joined:
2009/10/13 21:28
From Trinidad and tobago
Group:
Registered Users
|
Following day i was back at it again,put on the new carb 32/36 weber,its an original one too just as the previous.Fired her up and one tumble she started,set the idle and took her for a spin,whooo!!!! she runs sweet!
I have my mind set on rejetting soon!
Posted on: 2017/1/22 11:31
|
|
_________________
'71 Four Door Sedan.
A15 Engine + Lighten Flywheel.
E15 Electronic Ignition 32/36 Weber EI Coil 4 into 2 into 1 Extractors 1 3/4 Exhaust Pipe Semi Flow Hotdog 60 series Gearbox H150 Diff.
Street Sleeper!
STILL LIVIN' THE 70'S LIFE !!
|
|
|
Re: Datsun 1200 Sedan Build |
|
Home away from home Joined:
2009/10/13 21:28
From Trinidad and tobago
Group:
Registered Users
|
Got the rear tyres sorted out,after that the carby started to give some trouble when driving it was very uncomfortable,at low speeds it will have a flat spot and hesitation,it will idle very good no issues but at around 1500 rpm it will die out then pick back up,removed the top and rechecked all jets, checked float level and for air leaks ,it was a used carb that i got and had been on for about 4 years tho i figure its time,so i decided to go and get a new one from the performance shop.
Some pics of the carby.
Also as that was happening the charge light was staying on,rev her up and the light will come off,checked the voltage and it was somewhere at 14.05, so it was overcharging, i ruilled out the voltage regulator so it wasn't that, went to a local scrap yard and picked up an alternator from the Mazda 626 F6 8-valve SOHC engine,bolts straight on to the A series engine block no mods,all jacks plug in,just to rewire.By-pass the external voltage regulator? the electrician did that part for me.
Some pics!
Posted on: 2017/1/22 11:17
|
|
_________________
'71 Four Door Sedan.
A15 Engine + Lighten Flywheel.
E15 Electronic Ignition 32/36 Weber EI Coil 4 into 2 into 1 Extractors 1 3/4 Exhaust Pipe Semi Flow Hotdog 60 series Gearbox H150 Diff.
Street Sleeper!
STILL LIVIN' THE 70'S LIFE !!
|
|
|
Re: Adjustable Camber |
|
Home away from home Joined:
2009/10/13 21:28
From Trinidad and tobago
Group:
Registered Users
|
i don't really understand unfamilia,
Little washer on top then pipe them big washer on top of top spring hat?
what pipe?
Posted on: 2017/1/19 0:41
|
|
_________________
'71 Four Door Sedan.
A15 Engine + Lighten Flywheel.
E15 Electronic Ignition 32/36 Weber EI Coil 4 into 2 into 1 Extractors 1 3/4 Exhaust Pipe Semi Flow Hotdog 60 series Gearbox H150 Diff.
Street Sleeper!
STILL LIVIN' THE 70'S LIFE !!
|
|
All Posts (darrenwilson)
SAM_1735_zpsb50d0da9.jpg (154.62 KB)
Transfer
