Sold

I can't seem to load images so please email or text if you'd like to see pictures of the car.

Reluctant sale but with 5 kids I no longer have the time to play with old cars.
I have owned this car since 2003.
Specs are as follows:
Motor
Nissan S13 Silvia CA18DET installed by Kev Rowley
Rebuilt by Power Brakes and Engineering (15,000km’s completed since rebuild)
Arias 20 thou over forged pistons
Growly adjustable camshaft wheels and CAS mount
Inlet camshaft replaced with a CA18DET exhaust camshaft
Garrett GT28R ball bearing T28 turbo
Custom winged sump
Pod filter
Custom 3” thick air-to-air intercooler with 2.5” plumbing
Custom 2” thick alloy SR20DET radiator
SPAL 10” and 12” thermo fans
Serck engine oil cooler with braided lines
Custom radiator and intercooler water spray
Custom oil/air separator
Heat coated custom split dump pipe into a 3” mandrel bent exhaust
Plumbed back blow off valve
Growly engine mounts
Gizzmo EBC with 12psi, 15psi, 18psi and 20psi settings
Brand new Haltech Elite 550 ECU and brand new wiring harness installed by Tim at Crimp My Ride
Brand new coilpacks, ignitor and leads installed by Tim at Crimp My Ride
Sard fuel pressure regulator
GTR fuel injectors (recently professionally cleaned)
Brand new Walbro 255 fuel pump
Nissan R31 Skyline fuel tank (recently professionally cleaned)
8mm fuel lines (recently professionally cleaned)
Relocated battery (brand new)

Gearbox and Driveline
S13 Silvia 5 speed
Short shifter
Jim Berry Race Clutch 2125lbs clutch
Modified Datsun Stanza tailshaft
Nissan R31 Skyline differential with Kev Rowley Caltrac anti-tramp kit, 4.11 centre and mini spool
Rebuilt steering box

Brakes and Suspension
Datsun 13/16” brake master cylinder
Maddat RX7 4 piston front brake kit and QFM brake pads
276mm RDA slotted rotors
Maddat aluminium hubs
Maddat braided brake lines
Nissan R31 Skyline brake discs and calipers, RDA rotors and Lucas brake pads
Maddat Ultimate Race Coilover kit
Koni yellow externally adjustable shock absorbers
Kings Springs 250lbs coils
Maddat aluminium adjustable camber plates
Maddat bump steer spacers
Maddat heavy duty adjustable castor rods
Custom 17mm swaybar by Accurate Suspension
Custom front strut brace
Polyurethane suspension bushes
Koni adjustable red rear shock absorbers
Reset rear leaves

Wheels
Superlite GTR 15” * 6” +24 front, 15” * 7” +25 rear
OR
Southern Ways 15” * 6.5” +16

Body
Painted in Cobra Paint Systems Manila Beige
Cosworth bonnet vents professionally installed.
Front guards professionally pumped and rolled. 205/50/15 tyres fit.
Rear guards professionally rolled. 225/50/15 tyres fit.
Body rust proofed.

Performance
182.5rwkw @ 6300rpm on 20psi with GT28R turbo and Cam tuning
173.4rwkw @ 6200rpm on 18psi with GT28R turbo and Cam tuning
164.3rwkw @ 6400rpm on 15psi with GT28R turbo and Cam tuning
155.1rwkw @ 6300rpm on 12psi with GT28R turbo and Cam tuning
61.33 sec Lakeside (dry track)
60.56 sec QR (Sprint Track - wet)
68.71 sec QR (Clubman Track - wet)
12.753 sec @ 109.04mph (1.815 sec 60 foot) (previous 163rwkw tune)

Interior
Driver’s race seat and re-trimmed original passenger’s seat (re-trimmed original driver’s seat included in sale)
4 point racing harness
Suede leather steering wheel
Alpine CD tuner
Pioneer 6.5” speakers
Vision engine immobiliser and battery kill switch
Nissan Pintara pedal box
Quell .9kg fire extinguisher
Gauges ~ Speco 4” tacho, Speco 2” boost, Speco 2” elec. water temp., Autogage 2” elec. oil temp., oversize low oil pressure warning light

Modifications have been engineered.
I am sure there are plenty of things I have forgotten. Feel free to call/text/email/private message with any questions.
This car has been built for circuit racing but bolt some slicks on and wind the boost up and you can run 11’s all day.
The ute will be sold with current Qld historic registration but without an RWC as it currently has a mini spool diff centre. You can either find a friendly mechanic to provide an RWC or change the diff centre to an LSD or open centre.
As the car hasn’t been driven much recently all fluids have been replaced, the GTR injectors have been professionally cleaned, fuel pump replaced, fuel filter and oil filter replaced, fuel tank and fuel lines professionally cleaned, battery replaced, new Haltech Ecu and new wiring loom and new coilpack set up professionally fitted.
Comprehensive logbooks and thousands of receipts included.
The CA18DET conversion was completed by Kev Rowley.
$19,500 ONO
I have a large amount of spare parts including a gearbox, panels, axles, wheels, tyres including semi slicks, sensors, manifolds, brake components etc that can be negotiated with the purchaser.
I’ve owned the car for over 15 years so I’m not interested in responding to low ballers or test pilots. If you genuinely want a well sorted Datsun 1200 then I look forward to hearing from you.
Matt
0401 968 961
mgbehan18@gmail.com

Sorry guys everything has sold.

Thank you for the interest.

Hi all
I'm looking to clear out the garage a bit. I've tried to price everything reasonably but feel free to throw me an offer at me.

New Parts
A12 gasket set $20
A12 Protex clutch kit $20
Waeco seat ventilation cover (cost $90). Plug it into the cigarette lighter and a little fan ventilates the driver's seat. Great for cars without AC - $5
Datsun 1000 ball joints and tie rods - $20 each


Good Condition
13" by 6" jellybeans with Avon formula semi slicks (5 wheels, 4 tyres). Perfect for the upcoming Nationals - $100
A12 distributor - $5
A12 alternators - $10 each
A12 starter motors - $10 each
A12 rocker covers with oil caps (one chromed, one factory blue) - $10 each
H145 diff housing - $10
H145 4.1:1 diff centre - $20
H145 axles - $10 each
Datsun 1000 coupe tailshaft - $10
Datsun 1000 windscreen wiper motors - $5 each
Rellin Weber tuning book - $5
60 series 4 speed gearbox - $40
CA18DET head - $40
CA18DET inlet manifold - $20
CA18DET gearboxes - $250 each
Bosch 040 fuel pump. Replaced while chasing an issue but turns out the pump wasn't the cause. Approximately 3,000km use - $20
Ute elasticised mesh tray cover. Large size. Used once. Cost $80 - $10

Average Condition
CA18DET sump $10
Datsun 1000 bonnets, guards, doors, bumpers - $5 each
Datsun 1000 grilles - $10 each
Custom 10" by 6" steel wheels (set of 5). Ideal for lowering the centre of gravity for racing - $40
R31 LSD centre in need of new cones - $40
CA18DET camshafts - $5 each
CA18DET cam covers - $10 each


FREE
Datsun 1000 various suspension components
Datsun 1000 complete front drum brake set up
Datsun 1000 spare brake drums
Weber sidedraught parts - old and banged up trumpets, gaskets
Various heavy duty extension leads
Various 2,500kg load straps


Contact me on 0402 481 829 or mgbehan@optusnet.com.au.
Happy to post the smaller items after payment has been received but the larger items are pick up only.
Happy to text or email photos upon request.
Cheers Matty

Maddat sell them mate. The price is on their website too.

Sunny struts located in Narangba, Brisbane. No brakes.

Contact Matt on 0402 481 829

Hi boys
Unfortunately, the two Mustangs we'd organised for our wedding next Saturday have fallen through.

If anyone is free and feels like showing off their car to a 100 or so people I'd love to hear from you.

Details are:
Pick up from Narangba at 1:30pm and drop off at Scarborough 25 minutes away.
Happy to throw you some money to grab fish and chips or whatever while you wait around the waterfront.
Pick up from Scarborough at 3:45pm, stop off at Redcliffe 5 minutes away for a couple of photos then head back to Narangba by 5pm.

Happy to compensate you for your time with alcohol or money.

Shoot me a text on 0402 481 829 if you can help out.
Cheers Matt

Bump

Bump