Hey guys,

I have a good condition Stanza grill (plastic with the four square headlight spaces) for sale. Anyone interested?
Perhaps 50 bucks? Make an offer.
justin

Are they the same? Good point. Did a bit more research.

120Y early = 1200
120Y late = no
sunny = no

correct me if I'm wrong this time.

Hi there,
is anyone interested in an A12 engine that has sat in the weather for a while? I do know that it was rebuilt and revved beautifully when I had it in my 1200 auto coupe. It is located in the Canberra area. If anyone is interested please PM me.

cheers justin

Hey guys,
I'm chasing some seat rails for my 1200. Mine are stuffed. I believe all of the above will fit.
cheers,
Justin

Muffler and pipe will need to be welded unfortunately. It's a sports muffler, but reasonably quiet.

I have a 2.5 inch straight through mercury muffler and exhaust pipe from just before the diff to rear. Originally on 1200 coupe.

New muffler used 1 week. Would suit A series set up. Exhaust is not mandrel bent.
Just looking for 40 bucks or less. Make an offer. In brisbane, PM or msg me 0400 285 727.
Cheers, Justin

Attach file:

---

  P1070658.JPG (129.79 KB)

Hi,
yes they will clear S13 calipers easily. They fitted the rear of my coupe perfectly with 205 R14 tyres. Looked great. It is a set of 4 rims.

I have some mags for sale, 14 x 6.5. Deep dished, they are beautiful on a 1200, I would have them on mine but my diff is too long. Perfect with standard diff. I have 200b struts and they are fine with those up front. Will need lowish profile tyres to clear guards.

I'd like $100 for them, but any reasonable offers will be considered.

Send PM or msg me 0400 285 727 (in Brisbane).
justin

Attach file:

---

  14x6.5.JPG (142.39 KB)


  14 x 8 front view.JPG (96.47 KB)

Hi there,

post package dimensions would be 90cm x 50cm x 6cm. Weight is 2-3 kg. Therefore to 3805 is around 17 bucks - allow for 20.
Yes it was slightly restrictive with the airflow. Mind you I had a T25 roller-bearing turbo giving a lot more air than standard T25. An A12 turbo set up should be fine.
The blackstone units are known for there efficiency in cooling air- all aluminium and very light with plastic end tanks.

I have a saab-9000 blackstone intercooler for sale. The saab 9000 used the garrett T25 turbo (i think) with a 2.0 petrol engine. The core measures 22" x 26" x 1.5" (inch). Although huge, I fitted it to my 1200 quite easily, the lower section slipping between the chassis and apron. It was a just a bit restrictive with the CA18T, but I believe it would be perfect for an A12 turbo set up, especially a circuit car due to its large surface area.

Really only looking for 25 bucks. Can post, I'm in Brisbane. Any takers?

Attach file:

---

  Saab intercooler.JPG (158.25 KB)


  Saab 9000 intercooler.JPG (180.45 KB)