Everything still for sale.

location and rough price please.

Will camber tops hold the spring two inches less captive because the nut will be just above the perch instead off way above the perch?

Or do they require another perch bellow the rose joint so basicly the same but two inches bellow the strut tower instead of above the strut tower?

So the bump loss is small but the height gain is sh!t. Hmmm time for adjustable sleeves... Which would result in more bump loss to keep the height down.

The footwell issue is the real problem with nice wheels. Before I get a good set I'll be trying to get as much caster as possible, then reshape and flare guards so they are forward more without looking crap.

Also bringing the tops in to increase camber and require slightly less flare.

I think it worked out that a 14x7 +10 would sit out 40mm from stock body with stanza lower arms. So about 25mm with ute arms.

1degree negative camber would move about 5mm.

6.5 wide rim would take another 12mm off.

So if you found a zero offset 14x6.5 and you had small diameter springs with -1 or -1.5 camber tops so the tyre clears the strut then you may get them to fit stock guards.

I dunno, I've only just come back to datto but everything I got for my old R32 was from interstate or oversea's.

If anyone wants to prove me wrong with a cheap 12A haha.

haha, yeah SA sucks for good parts.

Thought everyone would be trying to score some cash for leftover A12's?

Anyone?

Will need in the near future as Oot is getting very smokey and my current living arrangements mean I can't fix it. Will be easier to spend a couple hours fitting another engine.

Looking for preferred A15, A14 or 12A+grbx (no efi just simple carbies) but I'll take what I can get, A12 or even a L18+grbx, L20b+grbx if I can find the time to fit them.

Thanks good people.

If inspection sticker says +0 offset for 6inch but wheels are 7inch then they could be +12. Sucks that they have the wrong sticker.

Very nice wheels.

They must have sat out from your utes guards a fair way especially if you had spacers?

What state and backspace/offset are they?

cheers