rightoo thankss just thought id check haha lucky i did..

Hi,
I found some lowered coil springs for the front of my 1200 ute they measure approximately 88mm inside diameter and 110mm outside diameter will they fit stock 1200 struts??

still forsale any takers???

bumpp

Brand new in original packaging 15x6.5 King Sabeth wheels, multi fit rims so can fit 4x114.3 and 4x100 +38 offset so should fit most 4 stud patterns. These are genuine King wheels so quality is assured also very light so wont effect fuel consumption they include the king centre caps and 16 wheel lock nuts. Located in Leeton NSW cheap to freight as i got them freighted to my door for $55. Need them gone i need the cash...

Attach file:

---

  398349_10151175790808521_192322150_n.jpg (26.77 KB)


  223752_10151171135788521_2015106748_n.jpg (43.20 KB)

okk then ill check it out with the washes first..thanks for the link aswell..also will these fit on the hub centre of the datsun 1200 ute? what is the hub size of the datsun??

yehh im not sure..I was just thinking that ddgonzal its the only way i will figure out what size i will needhaha thats a weekend job im busy studying for HSC at the moment haha

Thanks

ok i found 2 sets on ebay ill post the links my rims are +38 offset and dont fit by a decent amount roughly what offset will i need to fit them on the front im thinking a 20mm spacer as i was told i need to get it down to like +6 to +20 but can only find 15mm spacers or 25mm spacers in Australia..Also i need to know the bore size of the hub so i can see if they will fit as the spacers im looking at buying are 67.1 mm..the links-

http://www.ebay.com.au/itm/4x114-3-4- ... ae3&_uhb=1#ht_2722wt_1007

http://www.ebay.com.au/itm/1509253676 ... m1423.l2649#ht_2668wt_783

Which ones do yous reckon??

Hi guys im after a pair of 15mm-20mm spacers for the front of my 1200 ute as im have trouble with the rim +38 offset hitting the strut which means i cant even get the rim on properly..as you can see the top stud isnt all the way in properly and its on angle and the other pic is of the rim hitting the strut.Also i was just wondering if i was to put on say 15mm spacers would i need to change the wheel studs to longer ones??

Attach file:

---

  643944_10151171134923521_1403110927_n.jpg (135.30 KB)


  154197_10151171134543521_2014852234_n.jpg (57.88 KB)

so im ok with the back then i might buy some 15 mm spacers for the front then see how they go im gana go with a 185-55-15 tyre as well they will fit fine under the front guards??