i get slotting the outside bolt holes to 80mm spacing, but what needs to be done to the inside taper hole for the w50 ball joint? just so i can instruct the machine shop on what to do.

Chasing Steering arms for a stanza, W50 model, Let me know price and postage.

Ok i have a late model 1200 ute, i have been searching for stanza steering arms to suit my 280zx strut conversion but i cant find any, my question is... i have the 280zx steering arms, and obviously the utes got its original late model steering arms, Can i modify either of these to work, and whats involved?

Reviving an old thread here but I just purchased a civic console, just wondering if anyone who has fit one has had any issues with the shifter not being able to go into either 1st and second or reverse ? Seems like mine pushes on either side with the big gaps between gears?

so my ute was t-boned by someone, i have bought new rear quarter and drivers door, my question is how do i go about removing the damaged rear quarter, i can see some spot welds along the top under the tray lip. what about at the door jamb and at the rear, plus underneath?

ok thanks, im going to start the search for some stanza steering arms i think.

1985, from what i can tell i need b310 knuckle's LCA's and castor rods?\

can these parts be purchased anymore or do i have to source them second hand?

I have had a read through that but i cant really understand what other parts i need to collect.

So I have t3 coilovers built on 280zx struts which I am putting on my 1200 Ute, I have bought 280zx hubs calipers and discs also, will the struts now just bolt into my Ute or do I need more parts, also bought the brake master from a 280zx, do I need to change mine to this

yes ive tried search...

I am wondering if anyone has run 14x6.5 0 offset on a 1200
I have a ute and im looking at some SSR Mesh rims that i will run with small tyres but im wondering if they will fit ok on the front end. I am running 280zx struts, so the track is pulled in slightly?

Cheers
Darrell