def too short for my kev rowley crossmember. tested again last night with a mate to be sure.

going to order some ca18 ones

I brought kelpro cortina mounts as suggested on here. still seems to be way off fitting.

Just got my crossmember from Kev Rowley. Has anyone used any other engine mounts other than the stock s13 ones with one of these crossmembers?

Hi again,

reducing the coolant lines in my ca before the install. eliminating the connection to the intake plenum
and deleting the heater. after reading the driftopia site i just need a couple things clarified if
anyone can help.
Where the stock oil cooler pipe runs back into the rear of block there is tee in the pipe....can i plumb a line from this to the turbo or is it a return only? also if i cant run a line from there, can I run one direct from the outlet at the back of the thermostat housing (above coolant inlet) to the turbo?

cheers

Very true supafatto. Ive got a few more big ticket items left to purchase then im pretty much up to fitting and blue plating. Not bad considering i only get an hour here and there to do the work.
Get some more photos up soon

Still left for sale

Engine

Fuel pump

Alternator

So the xmember and loom have been sent to Kev Rowley today. gearbox is out and ca20 bellhousing is ready to go.
New fuel lines arrived as did the braided turbo lines and bearing for the stumpy box. Picked a dual port turbosmart bov really cheap on gumtree too.
Slowly coming together.
I knew this would happen....when i removed the xmember and looked at the suspension im now considering delaying the project and going brand new adjustable everything.

Hey Datsandy,
THanks for the reply but its the countershaft bearing i need to replace so it sits snug in bell housing.

I just found another part number somewhere on the web, but when i call places up here it seems to hard... Thats Far north queensland for you though.

OK, so its the NSK not NGK bearing....B2219C3ur

Called nissan and two parts stores and got nothing....any other suggestions? i can find it on google but nothing in aus?