I'm sure this question has been asked before ! I've had a look on the forum but haven't had any luck ... Can any point me in the direction ?

Or can anyone give me the process of shorting an r31 diff to suit a 1200 ute ? I have a fair idea but have never done it before

Thanks

Hi

Has anyone used a s12 gearbox behind a ca18det ? I don't know much about the s12 box and was wondering what mods are needed to fit it to the motor and are they a good box ?

Are they the same size as a stumpy box ?

Any info would be good !
Thanks

If I was get hold of an LSD for my h165 with it strengthen the diff up more then having an open h165 ?

Hi

Wondering if anyone has done the sentra rear disk conversion from teck wiki ?

Are the cad drawing for the bracket good has anyone use them before ? Is their a certain year model sentra that you have to use for the rear calipers ? And I assume you have to get a custom hand brake cable made up ?

Any help would be great
Thanks

Sweet ! So it was only the 260c that had the 6 stud ? Did the s110 and the vanette have the same width diffs ? And don't need to be shortened to suit the 1200 ute ...

What year model did the 1600 come out with the h190 ? I through they only had IRS ?
What the difference between the vanette diff and the s110 diff ? Apart from the stud patten ?

Sweet !! What do you charge ?

Keep looking .... Look up brake modifications common one is the s13 conversion

Thanks !

I'm looking into options on upgrading the diff to a stronger LSD diff to handle a ca18det conversion .... I have a h165 that's not an LSD and don't think it would last very long with a ca18det in front of it running 16 psi ! I haven't looked into h190 much .... But if it has the same axles as a h165 their would be no difference in doing the conversion apart from the LSD ? What about other nissan diffs ? Like the navara ? I'd say it would have to be shortened and converted back to a 4 stud to

Hi

Wondering if anyone has done a 910 diff conversion to a 1200 ute ? Or if anyone has any info on the diff,
I assume it would be a wider diff ?

And would require all the usal diff mods when converting into the ute.

Any help would be great thanks !