Got a standard shift 5 speed in Melbourne if you're interested

It has plates, does that mean that it's currently registered?

What sort of tyres? Matched set?

I have a pair of low mileage (kilometreage?) red konis sitting in my shed. They did about 5,000 km after I fitted them new to my 1200 coupe. The coupe is long gone and I don't anticipate getting another one (got an SR20 Sunny coupe now )If you're interested, I'd want $250.00 for the pair and I reckon they might be a better bet than a pair of Repco shocks.

For those of us who sometimes don't dare to ask for fear we might look foolish or cheap, or both, what sort of dollars might secure this rare and magnificent device?:
(a) $250
(b) $500
(c) $750
(d) all of the above

Plus one for the rebuild thread

Back in the day, Renault 10's had 135-15 tires, and they were pretty well always Michelins. I've seen a few of these cars in the last 10 years or so that look like they have tires that were made AFTER the 60's so perhaps they're still available. Pretty damn skinny - keep away from tram tracks or you might end up at the terminus!

I have two of the pulleys with offset dowels (somewhere) they can be fitted eight? different ways to give various different cam timing increments. I'll see if I can find them. PM me if you're interested

You'll never fit another switch in without modifying the tunnel. I cut the switch off leaving only about 3 mm of protrusion out of the side of the gearbox - it just cleared in the tunnel.

You could put a switch with a little pilot light on the dash, that's an easy solution. One asdvantage of doing that is that you can flash at people behind you who are annoying you

Like these?





These are a balanced set of four ARIAS forged pistons a12 +040 with floating pins, teflon buttons, new rings. High comp - don't know how high - but there's plenty of meat in the crowns of the pistons so the tops could be machined off for a lower compression or a turbo application. These would be $1000 plus if you could get them (and if you were prepared to pay!). I'm open to offers.

edit: I'm not looking for $1000!!