What is up with message board I cant read the posts other than the first bit of message is the web page space all been used??? maybe its time to delete some of
the old messages???

I have some bad new's I went for a hard drive today with boost set at 18psi a bit of avgas and bang 3rg gear cant handle the torque :( I have to pull it out tonight and
inspect dosnt sound good though :( it still drives in gear just very noise a bearing I think as I dont think teeth are torn off yet.

Nah top speed on run was about 210 at 6600 in 5th only has low diff in it at moment some one work it out it 5th gear ratio 0.83 diff ratio 4.625:1 tryes 195/65/14 6600 revs in
top the needle stick back on 0kmh at 5400rpm in 5th :)I would hate to think what top speed would be approx 240-260 with 3.3:1 diff.

They are actually 4 and a half leaves. One on the top goes from under diff to front of hanger to stop tramp it used to have only 3 but the torque was starting to bend the springs so It
had a S shape leaf spring for a while was wondering why it was getting lower at rear hehehe.Bet no one on list has had that problem before??? the guy who built the springs was
supprised as well.

Hi Chris If you dont want it I know of quite a few that would like it :) BTW Im after a LH door skin or complete door in good nic for my 1200 coupe as its getting that long needed panel
work and paint job :) If you or anyone can help it would be greratly apopreciated are you or your brother going to jamboree in Qld on the 17th june? Im taking the datto up to hopefully
cut some quick times

I know a guy who build thes rally stroker engines not cheap its not just a bol in job needs a fair bit of machine work they can produce 150hp at 7500 so they still
rev pretty well.

Yep I sure have :) very costly but lots of HP still nissan motivated and legal but around 450-500hp fibreglass panels ect ect more like a road regoed sports sedan :) Im only
dreaming at moment but maybe one day. Would be neat tidy huge brakes fully floating rear big rims very low would frighten the shit out of anybody that sat in it heheh :)

HEHEH that joyride list is getting very long endeed :) I enjoy taking people for little drives but Im finding it hard as I like to keep to back roads so I dont get caught going to
fast:) BTW I was offered $8000 and knocked it back. Dont really want to sell anyway as would cost over $20k to build the ultimate 1200 :)
Well one day soon I might take you for drive.

Most capacity I have heard of is 1608cc thats bored 120 thou.Suppose anything is possible if you want to spen the $$$ Unsure what sort of rods would fit anyway A12 would be a bit
short. I know you can stroke a A12 with A14 crank A10 rods 120 thou over pistons giving it 1530cc :) hehe a few rally guys have done this as they have to run A12 blocks.

I Have just had major problems with new ICQ 2000 it wouldnt re register my old number so I now have a new number if you want to be added give me a yell my new
number is 72273951