TITLE:For Sale-4 off H-Beam Conrods A14/15 and 5 off 39mm competition titanium inlet valves & 5 off 32mm comp titanium exhaust valves to suit A series.

ITEM:
1.4 off H-Beam conrods to suit A14/15 with 21mm bush small end.Ex Peter Zekert stock.

2.5 off 39mm Titanium competition inlet valves and 5 off 32mm Titanium competition exhaust valves.Ex Peter Zekert stock.

CONDITION:
1.H-Beams in good used condition!

2.Titanium valves all in good used condition!

REASON FOR SELLING:
Excess parts to my needs!

PRICE AND PRICE CONDITIONS:
1.H-Beams- $300 plus postage

2.Titanium valves(10 all up)-$350 plus postage

EXTRA INFO:


LOCATION:
Gold Coast,Queensland.Australia.

CONTACT:
PM me if u would like any more details,thanks.

Peter.

PICTURES:
<insert text here>

Attach file:

---

  1-20130803_124114.jpg (142.96 KB)


  3-20130803_124458.jpg (182.80 KB)


  6-20130803_124941.jpg (103.50 KB)


  2-20130803_172451.jpg (67.72 KB)


  4-20130803_124532.jpg (127.43 KB)


  5-20130803_124541.jpg (123.67 KB)

Nice bit of kit,but i'm pretty happy with my maddat one for $160!
http://maddat.com.au/products/ssras.htm

Bprojects on ebay $95aud!
http://www.ebay.com.au/itm/Rocker-Sha ... 3cc5701db0#ht_1820wt_1037

You can get 20 litre drums of Toulene from your local Paint supply depot or distributor,i get mine from Wattyl Paint Depot,$77.00!It works out approx $2.05 liter mixed depending how much you pay for 98 fuel.I mix 4 lt toulene with 16 lt 98 fuel.

I am running A15 with 12.5-1 comp ratio and i mix 20% toulene with 98 octane fuel to boost "RON" to approx 102,that sorts pinging out quick smart.You could try some octane booster from your local automotive supply stores i.e. autobarn,supercheap etc.That would be a cheap way to check if it sorts it out or not!Also depending on winter/summer conditions i do use BP5EY/BP7EY respectively.Hope this can be some help.

Gday all,
Just wondering if anybody has a 18t speedo drive assembly to suit 60 series gearbox that they might like to sell.I am on the Gold Coast.Just pm me if you have one.
Thanks in advance.
Peter.

Hey,
i get mine done in Nerang at Motacarb.The owner Craig is a datsun nut as well,he just recently sold a 1200 coupe short circuit racer that absoltuely flew,it ran twin webbers as well.He also has recently purchased a 2 wheel dyno!I recommend him highly and is as genuine as they come.There phone number is 07 55961338 and they are located in Jaygee court which runs off Spencer rd in Nerang.

Cheers.

I had a similar problem and it ended up being flywheel bolts had come loose,ie no loctite on bolts,similar situation (new exedy clutch kit,machined flywheel,same amount of km's after reinstalling as well).Just thought i'd mention it,may be some help.

You have a pm!

He does the underside of bonnet as well in fibreglass,he asks if u want hinge mounts and bonnet catch mounts(he puts 5mm aluminium where bolts go in and taps thread),ie if ur putting on a street car he does nothing and if it's on your race car you use 4 bonnet pins.
Just give Kev a call,he is very helpful!!!