hey manne, ja. Ek like goed wat rev... ongelukkig. Ek sit met iets wat ek nie weet of dit n goeie of slegte ding is nie... N SR18De. En ek is hard opsoek na die verskill tussen die SR20 en hom.
Wat ek sover weet is die boor op die sr18 is 82.5mm verder selfde crank en rods as sr20. Dan praat n paar manne van hyt agressiever cams ook. Al wat ek wil weet is die heads. Is da n verskil? :P

haha, ja jy moet die pics gan kyk in my gallery, nou bietjie lat shotpeen as hy kla geknife edge is, Kannie wag dat hy weer loop nie. Fokkin A14 ^_^

More manne, fook kannie glo hier is so thread nie, en dat ek dit nou eers sien. Hendrik, ek moet met my pa praat oor die crank want hy is vol stories, anders is hy joune. En ek kry hopelik vir my n nuwe stel pistons einde van die maand... kak om n arm student te wees.

Popping sound has also been a problem on my lower range, Is it a to lean setup ?

Ah guys, swedish metal bands, my fav. SoilWork, sonic syndicate ect. Then for the chilled out evenings, City And Colour. ^_^

hey, yeah if u want the number of uncle lammies @ lamco i can give it. I prefer to talk to him directly. Otherwise u could try Camshafts dynamics in Jhb, im currently running one of their cams. will add a clip of the bakkie once iv sorted out a few issue's ^__^

Okay i have struggling the last week with dash lights not working, stripped the whole dash found no indication of blown lights, nothing. Tested the fuse's they all fine... now u tell me they can be dud's ? :(

Agreed, i used a stock sub, but with head work and a cam to spec. this would be what those Webers want.. and u aswell probably ^_^

yeah, stock balanced :D

i dont seem to be getting spark from the dizzy, My ignition is not connected so i took a positive from my bat to the positive of my coil to get the dash on and the coil then i bridged the positive on my bat en the signal to get it turning. did i do sumthing wrong ? ;/

Ah i know i know, just wanted to know the limits of the stock subs. If i get spark on the engine later to day hopefully, i'l post a picture if its running okay The engine has been in the shed for almost 7 years. Still stock though at the moment

If i go the other way with all the proper goods i'l take it to see where it makes max power on the dyno.

But dont u just love the sound of a high revving engine :)