User Login    
 + Register
  • Main navigation
Login
Username:

Password:


Lost Password?

Register now!
Fast Search
Slow Search
Google Ad


   All Posts (mcgee)


« 1 2 (3) 4 5 6 ... 48 »


Re: 3J Improved Production coupe- Racing Videos & Progress
Home away from home
Joined:
2005/3/2 7:09
From Canberra
Group:
Registered Users
Posts: 481
Offline
that other 510 has and sr20 in it and a lot of fibreglass panels. it's essentiallu y built as a sports sedan. very quick running in the 61sec mark. I'm in the 64sec.

Posted on: 2016/3/20 2:07
Transfer the post to other applications Transfer


Re: 3J Improved Production coupe- Racing Videos & Progress
Home away from home
Joined:
2005/3/2 7:09
From Canberra
Group:
Registered Users
Posts: 481
Offline
thanks guys.
sorry I couldn't spend more time chatting. race day can get busy, made worse when you have issues
pulled over 1ltr out of the oil catch can this morning. so highly suspect blown head gasket and probably happened during the practice session. prior in hindsight, si was down on power. I'll post footage of my qualifying off shortly (off at over 160kph), the damage requires all rear suspension brackets to be replaced (all bent). diff pushed over one side, popped a tyre off the rim. that's racing I guess.

Posted on: 2016/3/20 2:04
Transfer the post to other applications Transfer


Re: 3J Improved Production coupe- Racing Videos & Progress
Home away from home
Joined:
2005/3/2 7:09
From Canberra
Group:
Registered Users
Posts: 481
Offline
yep sure am.
4x new tyres should help cure some of the oversteer.
Should be out there early tomorrow doing double duties with an F1000 team.

Posted on: 2016/3/18 11:06
Transfer the post to other applications Transfer


Re: 3J Improved Production coupe- Racing Videos & Progress
Home away from home
Joined:
2005/3/2 7:09
From Canberra
Group:
Registered Users
Posts: 481
Offline

Posted on: 2016/3/13 22:52
Transfer the post to other applications Transfer


Re: 3J Improved Production coupe- Racing Videos & Progress
Home away from home
Joined:
2005/3/2 7:09
From Canberra
Group:
Registered Users
Posts: 481
Offline
had a huge amount of fun yesterday at the track.
Using some very old (read now slick) A050's I wanted to just cut some laps to ensure everything stayed together.
Intercooler pipe blow off a couple of times (Hopefully fixed now) and other then that it was great fun to play with a whole bunch of oversteer with the shoddy tyres and new diff centre.
Looking forward to running at the night masters next weekend and on 4x new A050's :)
I'll post the footage to youtube. It wasn't fast but great fun.

Posted on: 2016/3/13 9:30
Transfer the post to other applications Transfer


Re: 3J Improved Production coupe- Racing Videos & Progress
Home away from home
Joined:
2005/3/2 7:09
From Canberra
Group:
Registered Users
Posts: 481
Offline
must have been the turbo as you said.

Posted on: 2016/3/7 0:02
Transfer the post to other applications Transfer


Re: 3J Improved Production coupe- Racing Videos & Progress
Home away from home
Joined:
2005/3/2 7:09
From Canberra
Group:
Registered Users
Posts: 481
Offline
that must be it. still happy with the results.

Posted on: 2016/3/6 23:55
Transfer the post to other applications Transfer


Re: 3J Improved Production coupe- Racing Videos & Progress
Home away from home
Joined:
2005/3/2 7:09
From Canberra
Group:
Registered Users
Posts: 481
Offline
LSD is for an early supra into a hilux third member.

my dyno results ended up very good, comment was made after first run. From this experience increase in torque from increased static compression is far greater then the numbers you quote above.

Posted on: 2016/3/6 23:40
Transfer the post to other applications Transfer


Re: 3J Improved Production coupe- Racing Videos & Progress
Home away from home
Joined:
2005/3/2 7:09
From Canberra
Group:
Registered Users
Posts: 481
Offline
installed the kaaz today.
used a conversion bearing on the crown wheel side which gives full engagement of the bearing locking nuts.
still pushes the carried a far way over to the pinion side only way to fix that is to run a crown wheel spacer. there is 1mm clearance to the bearing cap so I am hoping that is enough..... should find out pretty quick if it's not. I doubt the carrier will a. move that.much and b. if it does it would push away from the pinion which would open up the clearance.

Open in new window


Open in new window

Posted on: 2016/3/6 11:23
Transfer the post to other applications Transfer


Re: 3J Improved Production coupe- Racing Videos & Progress
Home away from home
Joined:
2005/3/2 7:09
From Canberra
Group:
Registered Users
Posts: 481
Offline
Car is all back together and safety inspected last night.
Entry in for Round 1 on the 19 Mar if anyone is local and wants to come out for a look.
Although it will be busy for me with a F1000 team to engineer for too.
New front Discs are on for this season (old ones had some heat cracking in them).

Open in new window

Posted on: 2016/3/3 10:32
Transfer the post to other applications Transfer



 Top
« 1 2 (3) 4 5 6 ... 48 »